Black Hole Mid Tower

Dare To Win. Dare To Build.

Black Hole ARGB Mid Tower Gaming Case 

The GameMax Black Hole Mid-Tower gaming case includes two 200mm ARGB Ring Fans that cover the full width of the front panel, the Black hole is designed to make building easier, this case is finished with premium aesthetics for those gamers wanting to go to the next level without breaking the bank.

Black Hole A-RGB Tempered Glass Gaming Case

The GameMax Black Hole Mid-Tower gaming case includes two 200mm ARGB Ring Fans that cover the full width of the front panel, the Black hole is designed to make building easier, this case is finished with premium aesthetics for those gamers wanting to go to the next level without breaking the bank.

The two 200mm ARGB fans come pre-installed at the front, whilst providing a visually striking design they also ensure plenty of air is brought in to your system.
A GameMax V2.0 ARGB hub included allows for stunning lighting effects and easy connection to your system. You can connect up to five fans and two LED strips to the hub and sync all to your motherboard using the 3 Pin AURA connection, please note the hub to motherboard AURA connection is not included and will needed to be purchased separately. Please note the included hub supports a total of 5 fans.

The left side panel is made of 3mm tempered glass you can also show off the aesthetics of your build seen through this stunning glass panel.

Situated on top of the Black Hole is one USB3.0 port, one USB2.0 port, LED & Brightness buttons, HD Audio and Mic Jacks.

In line with the GameMax ethos this case offers style, performance and the ultimate experience.

Key Features

Design – The Black Hole is a brilliantly designed Mid-Tower PC gaming case and the first GameMax chassis to include two 200mm ARGB fans not only will these look great in your gaming set up but enable exceptional airflow. Fit an ATX motherboard and with plenty of room you can fit a wide selection of top hardware, meeting most installation requirements.

Motherboard Sync – You can now take your colour control to new levels with the included ARGB motherboard connection on the PWM hub, simply connect the 3pin AURA from your motherboard and you can use the mobo software to sync your fans and strips the way you like.

Excellent Airflow – Excellent cooling options are on offer with two 200mm fans at the front are not only more efficient but a lot quiter compared to mounting 120mm fans, mount a total of eight fans and room to mount water cooling radiators on the front (Up to 360mm), top (Up to 280mm) and rear (Up to 120mm) your case will have no problem cooling those high end components.

ARGB Hub – Included in the Black Hole is an ARGB V2.0 ARGB PWM hub, connect up to five fans and two ARGB Strips, have access to 18 colour modes manually or have even more using the motherboard software. Once all connected enjoy PWM auto speed controlled via MB’s PWM signal, also 2 RGB buttons (Mode & Brightness), it much better for user to easy adjust light mode and adjust between 5 different brightness modes (0-20-40-80-100%).

Tempered Glass – A 3mm full left side tempered glass panel to show off your build from all angles.

Easy Maintenance – Located on the top of the Black Hole is a dust filters, helps to prevent dust from getting into your build and helps improve the performance of your chassis.

The GameMax Black Hole is compatiable with the following fans:

– GameMax Mirage Dual-Ring Rinabow RGB 120mm

– GameMax Mirage White Fans Dual-Ring Rainbow RGB 120mm

– GameMax Razor Rainbow ARGB 120mm

– GameMax Velocity Rainbow ARGB 120mm

– GameMax ARGB 3 in 1 kit

The GameMax Black Hole is compatiable with the following hubs:

– Spectrum ARGB Hub

– GameMax ARGB Fan Hub

Specifications

Chassis Dimensions (Excluding Fascia / Panels): (W) 210 x (H) 466 x (D) 360mm
Addtional Fan Support: Space For 2 x 120mm Fans (PSU Shroud)
PSU max. Length (mm): 170mm
Fan Controller Included: Yes
Fan Controller Power Via: SATA
LED Controller : Yes
Fan Power Connector: 3 Pin Fan Connector
LED Power Connector: 3 Pin AURA
Fan Control Via: PWM
Supported Qty of Fans (max.): 5
Supported Qty of LEDs (max.): 5
Packaging Type: EPE Foam
Packaging Thickness (EPE Foam): 23.42mm

Case Specifications

Form Factor: Midi Tower
Motherboard Support: ATX, Micro ATX, Mini ITX
PSU Support: Standard ATX
PSU Location: Bottom
Gaming Case: Yes
Water Cooling: Water Cooling Ready!
Supported Radiator Size: 360mm
Supported Radiator Positions: Front, Top
Body Material: SPCC 0.5mm
Front Bezel Material: ABS & Tempered Glass
Side Panel: Tempered Glass
Internal Cable Management Depth: 25mm
External Bays:
Internal Bays: 2 x 3.5” Internal
3 x 2.5” Internal
Drive Bay Notes: 1 x 2.5″ & 3.5″ Shared
Expansion Slots: 7 x Full Size
Cooling Front: Space For 3 x 120mm or 2 x 140mm or 2 x 200mm Fans (2 x 200mm Dual-Ring ARGB Fans Inc.)
Cooling Top: Space For 2 x 120mm or 2 x 140mm Fans
Cooling Rear: Space For 1 x 120mm Fan
Cooling Side: None
Cooling Bottom: Space For 2 x 120mm Fans
Fan Controllers: 1 Fan Controllers, controlling up to
5 fans in total
IO Ports: 1 x USB 3.0
1 x USB 2.0
1 x HD Audio
1 x Microphone
GPU Max Length: 355mm
CPU Cooler Maximum Height: 165mm
Front Bezel Colour: Black
Body Colour: Black
System Cabinet Features:
PSU Included: No

General Specifications

Manufacturer Part Number: GMX-BLACKHOLE
EAN Number: 6931858773058
Has Mains Plug: No
Colour: Black
What’s In The Box: Case
Manual
V2.0 Controller Manual
PWM Fan Connector
Screw Pack
Unit (Product) Dimensions (mm): 215mm x 466mm x 414mm (W x H x D)
Packaging Dimensions (mm): 272mm x 471mm x 515mm (W x H x D)
Net Weight (KGs): 5.9 KGs
Gross Weight (KGs): 7 KGs

DARE TO WIN

The GameMax focus is gaming products to enable everyone to have a great experience without breaking the bank.

Products

Reviews

About

Contact Us

11 + 6 =